So you just bought a cool new hoverboard and want to make the most out of it. It takes knowledge and effort to properly care of your hoverboard, irrespective of its make or model. Even if you buy a cutting-edge hoverboard, like the Hoveroo Elektra Hoverboard, you will still need to understand how it works and treat it accordingly.
You will be surprised to know how easy it is to misuse your hoverboard and cut its lifespan in half. The good news is that taking good care of it isn’t complicated either. So, let’s get started with our seven top things to do with hoverboards.
Keep It Dry and Clean (Don’t Forget the Wheels)
Wheels are the foundation of your hoverboard, and the motors are built into them. For this reason, it is important to check them regularly and see if any dirt or debris is stuck to them. If so, clean it with a soft yet thin brush that can reach the middle without damaging the insides.
Foreign particles can harm the motor sensors and can cause the board to lose balance eventually. Ensure the tires are in the same direction as the wheel shaft and each tire component is well-bolted. If loose, tighten it with a screwdriver.
If you see any signs of moisture on the board, wipe it with a dry cloth. Do not attempt to ride it in wet weather; keep it away from muddy grass. If the water seeps into the hoverboard by any chance, immediately turn it off, remove the motherboard, then take out the battery.
Clean all the components with tissues or soft, dry fabric, and let everything dry overnight. Never use a dryer to dry the moisture; it can quickly heat the battery and lead to a short circuit. Use a screwdriver to open the external casing and let the insides dry. Don’t charge the hoverboard shortly after the incident; it may easily catch fire.
If you feel the water damage is severe or the problem persists even after drying, take the hoverboard to a professional immediately.
Take Frequent Breaks
Hoverboards are mini scooters, not powerful motorbikes that you can cruise on for hours and hours. Excess use can quickly heat their motors, and this can sometimes cause a fire. During the hot summer season, it is especially advised that you avoid riding your hoverboard for extended periods due to reasons such as:
- The battery can heat up and cause an explosion.
- The battery can heat up and cause a fire.
- Excess pressure on the motor, sensors, and other components may cause them to fail permanently.
If you do heavy-duty cruising on your hoverboard, let the battery rest and cool down before plugging in the charger or using it again.
Don’t Let It Sit Idle for a Long Time
Moderation is key, so just like you shouldn’t overuse your hoverboard, you shouldn’t let it sit unused for long periods. Make sure to take it out for a spin once in a while, and keep it fully charged even if you are not using the device. If you fail to do so, the battery power will drain, and the integrated circuits will become damaged, which can ultimately cause substantial damage to the hoverboard.
Do Regular Maintenance
Like all electronic devices, hoverboards also experience wear and tear through regular use. This can cause their wires to become loose, circuits to get damaged, and tires to become worn. A deteriorated hoverboard can give you sudden problems and put your safety at risk. It is important to schedule maintenance at least once a month to avoid such situations.
All you have to do is unplug the board, open it up, and check if the wiring is tight and untangled and if there’re any signs of visible damage. Tighten the wires with a screwdriver or adjustable wrench if the wires are loose. If you see more complex damage to the board, it is best to contact a professional rather than trying to do DIY repairs.
Store It Correctly
After each use, it is important to store your hoverboard correctly. Always put it in a cool, dry place away from flammable materials. Too much heat can overheat the battery and lead to damage. If you are going on a vacation, store your hoverboard in your wardrobe to stay cool and moisture-free.
If you live in a very hot climate, reserve riding your hoverboard for days when the temperature isn’t too extreme. Furthermore, ride it in the evening when the temperature is relatively cooler. Keep in mind that the sun will heat the device fairly quickly, and the roads also add to the existing heat. This can cause the metal wheels to spark up and eventually explode.
Make Sure the Pedals Are in Good Condition
If you experience that your hoverboard is shaking and unable to maintain balance, that could indicate faulty or loose pedals. Without further delay, check to see the problem. Pedals should neither be too tight nor loose. Otherwise, there can be problems with the steering. Keep test-riding the board until the brakes and pedals are working optimally again.
Take Care of the Battery
Another critical thing to remember while using a hoverboard is to always keep its battery charged. Lithium-ion batteries normally power hoverboards, and they are rechargeable. However, how efficiently or how long these batteries will operate in the long run solely depends on how you handle them.
Regular charging is a must for every hoverboard, even if it’s not in use. However, it is equally important to prevent the battery from overcharging. Hoverboards need 2 to 4 hours to charge completely, or else they will charge until they can’t anymore. Overcharging the battery may result in an explosion, and the flames might consume your board and set the surroundings on fire.
If you are unsure about the charging instructions specific to your hoverboard, follow the guidelines in the manufacturer’s catalogue. Moreover, you should only use the charging cord provided by the hoverboard company. If you detect any signs of overheating, quickly unplug the hoverboard or stop using it.
If the hoverboard’s battery is not charging when plugged into a wall socket, you may be dealing with a bigger problem related to the circuit board. If the red light is on, that shows that the charger circuit and adaptor are working fine, but the battery might be faulty. If no light turns on, the adaptor may need replacement.
Owning a hoverboard comes with some level of responsibility. You need to know the dos and don’ts of the device so you can continue to experience its joy safely. Like all other electronic devices, hoverboards also feature circuit boards, sensors, gyroscopes, batteries, and other components that can quickly become a safety hazard if not properly maintained. Use the information shared above to avoid any danger.
The best way to avoid frequent breakdowns and serious maintenance issues is to buy premium hoverboards from reputable companies like Hoveroo. Avoid rough handling at all costs, and get your device checked by a professional periodically to prevent any damage from further worsening.